-
Shop for parts
Top Brands
Knott Avonride Euro hub nut
Knott detachable brake cableMeasures 1530/1740mm (outer PVC sleevelength/overall cable length),Cup on the wheel side of the cable comes with a 22mm fl..
€18.50
Ex Tax:€15.04
1-190x190w.jpg "Knott 2030/2240mm detachable brake cable")
Knott detachable brake cable 2030/2240mm (outer length/overall length), 22mm flange o/d..
€21.50
Ex Tax:€17.48
Knott 2130/2340mm detachable brake cable..
€21.50
Ex Tax:€17.48
Avonride 47mm grease hub cap
Fits Avonride A, C, E, & F series hubs
Dimensions - overall height - 32mm
This cap is made from galvanised stee..
€23.00
Ex Tax:€18.70
M24x1.5mm neutral One-Shot / hub / stake nutSuitable for ALKO, Knott, Avonride and BPW brake drumsSocket required 32mmNote: It is strongly recommended..
€4.50
Ex Tax:€3.66
M12 wheel boltM12 Thread13mm HeadThread Length 23mm Overall Length 41mm..
€3.00
Ex Tax:€2.44
AL-KO 200x51mm (inside diameter of drum x width of shoe) backplate assembly left hand side, centre hole diameter = 43.74mm.
Supplied with all compon..
€128.00
Ex Tax:€104.07
AL-KO hub cap to fit 200 Euro drum with sealed bering, outside dia 55mm..
€9.00
Ex Tax:€7.32
Knott detachable brake cable 1130/1340mm (outer length/overall length)22mm flange o/d..
€14.00
Ex Tax:€11.38
Castle nut to fit Avonride 200/203 brake drums- Knott Avonride A/C/E/F & R Series..
€4.99
Ex Tax:€4.06
Avonride brake drum 200 x 50 (ID of drum x width of shoe), 4 on 5.5" PCD, "A" Series, complete with taper bearings..
€175.00
Ex Tax:€142.28
Avonride 47mm grease hub cap
Fits Avonride A, C, E, & F series hubs
Dimensions - overall height - 32mm
This cap is made from galvanised stee..
€23.00
Ex Tax:€18.70
Avonride 52.4mm grease hub cap.
Fits Avonride N series unbraked hubs
Dimensions - overall height - 30mm
This cap is made from galvanized steel,&nbs..
€17.00
Ex Tax:€13.82
Avonride 60.32mm grease hub cap.
Fits Avonride R series hubs
This cap is made from galvanized steel,
which inserts over the hub and has a emb..
€15.79
Ex Tax:€12.84
Avonride 74.6mm grease hub cap.
Fits Avonride V & T series hubs
Dimensions - overall height - 34mm
This cap is made from galvanized steel, ..
€11.00
Ex Tax:€8.94
Avonride hub cap for 200 & 203mmExternal fit60mm diameter..
€7.50
Ex Tax:€6.10
Bearing kit for Avonride 160x35 'C' series drum. Kit consists of:
- Inner bearing no. 44649. Outside dia. 45mm. Inner dia. 26.7mm.
- Outer b..
€17.00
Ex Tax:€13.82
Bearing Kit for Avonride 200/203mm. drums, A & F series. Kit consists of:
- Outer bearing no. 32004. Outside dia. 37.4mm. Inner dia. 19mm. 700-20..
€23.00
Ex Tax:€18.70
Bearing kit for Avonride 250x40mm. 'V' & 'T' drum. Kit consists of:
- Inner bearing no. 48548. Outside dia. 53mm. Inner dia. 35mm..
€23.00
Ex Tax:€18.70
5/8" Castle nut, used on most unbraked susension units and stub axles...
€6.00
Ex Tax:€4.88
Castle nut to fit Avonride 200/203 brake drums- Knott Avonride A/C/E/F & R Series..
€4.99
Ex Tax:€4.06
Castle nut washer for Indespension 200/203mmDrums 3/4" BSF thread..
€6.00
Ex Tax:€4.88
Knott castle nut, M20x 1.5mm, consists of 2x M20 nuts, 2x washers, 2x split pins..
€20.00
Ex Tax:€16.26
Knott castle nut M24x 1.5mm, Consists of 1x M24 nuts, 1x washers & 1x split pins..
€16.50
Ex Tax:€13.41
Axle Nut Castelled 5/8 UNF..
€11.50
Ex Tax:€9.35
M27x2mm neutral One-Shot / hub / stake nut
Suitable for ALKO 2361 EURO brake drums
Socket required 36mm
Note: It is strongly recommended that hu..
€5.50
Ex Tax:€4.47
M24x1.5mm neutral One-Shot / hub / stake nutSuitable for ALKO, Knott, Avonride and BPW brake drumsSocket required 32mmNote: It is strongly recommended..
€4.50
Ex Tax:€3.66
Castle nut to fit Peak 203x40 drum, 3/4" UNF thread..
€5.50
Ex Tax:€4.47
The Avonride R series hub nut, washer, and split-pin are designed for use on trailers and caravans equipped with an Avonride axle with an R series hub..
€26.49
Ex Tax:€21.54